Latest Products
-
Hustler Aluminum 7/8″ CLAMP AREA – 7/8″ HOOKED HANDLEBAR - 13 DEGREE SWEEP – 1″ RISE – 30″ WIDE – 1″ RISE - Hydro Dipped Carbon Fiber
$ 149.95
-
POLARIS 650/850/900R/BOOST TETHER MOUNT FOR RMK STEERING STEM
$ 19.95
-
Ski-Doo QRS Secondary Spring - Torsional Black
$ 25.00
-
ARCTIC CAT CATALYST CHASSIS BILLET ALUMINUM MOMENTARY KILL SWITCH BLACK ANODIZED W/ OEM CONNECTOR
$ 59.95
-
Ski-doo Rev Gen 4/ NEO Performance Trail Kit (includes adjustable P-drive weights) 6000+ Clutch Kit for Straightline Exhaust (40 and 55hp Engine Package)
$ 449.95
-
Snowmobile specific grip glue. Will not break down in snowmobile grip heater scenario
-
Allows for Quick and Easy Adapting for Oversize Handlebars
-
• One piece 5″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
-
• One piece 8″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
-
Bolt on intstallation allowing Rider to position Hook orientation
-
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
-
BACKCOUNTRY -TAPERED 1-1/8″ CLAMP AREA -7/8″ HANDLEBAR – 14 DEGREE SWEEP – 29″ WIDE – BLACK ANODIZED
TAPERED BACKCOUNTRY BEND HANDLEBAR BLACK / INCLUDES LARGE BLACK BAR PAD
-
Great and simple Way to add Protection on your Stock Polaris Handlebars or Personalize your RSI Aluminum rise Handlebars
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
BILLET ALUMINUM ENGINE KILL SWITCH PUSH BUTTON BLACK
-
- Self adhesive grip tape to fully wrap your handlebars and hooks with a seamless finish.
- High traction outer synthetic rubber stays grippy even when wet or cold.
- Gel absorbs vibration for a smoother feel at the handlebars.
-
Aluminum Rise Style Handlebars Bolt on Replacement for OEM Polaris Handlebars
-
BOONDOGGLER TAPERED 10 DEGREE HOOKED HANDLEBAR 2″ RISE
-
CHROMOLY 13 DEGREE HANDLEBAR
-
CHROMOLY 10 DEGREE HANDLEBAR
-
CHROMOLY 16 DEGREE HOOKED HANDLEBAR
-
CHROMOLY HUSTLER HANDLEBAR 1″ RISE HOOKED HANDLEBARS
-
- Universal mounting for all machines equipped with a T-post steering post
- Helps develop the next generation of riders
-
Mountain Grab Bar Mounts Allow for mounting on any 7/8 or 1& 1/8″ Handlebar
-
Accepts 7/8″ and oversize 1 & 1/8″ Handlebars. Universal Installation on any t-post steering post.
-
Semi Ridgid Grab Bar Installs on RSI Aluminum Rise Handlebars or Can be Combined with HA1002 Grab Bar Mounts and installed on any snowmonile Handlebar
-
Hayes Brake Specific Snowmobile Handguard mounts for Stonewall Handguards. * does not work on 2020 Hayes Stealth Brake
-
TAPERED RACE BEND HANDLEBAR BLACK / INCLUDES SMALL BLACK BAR PAD
-
Replacement LH Side Spring style Scratcher
-
Replacement RH Side Spring style Scratcher
-
Flexible LED Lighted Handgurads will not break in the event of a roll over.
-
Displays Phone inside a weather resistant Handlebar pad
-
Universal Heater kit- requires 12 volt power source.
-
2020 Hayes Stealth Brake Specific Snowmobile Handguard mounts for Stonewall Handguards.
-
Extended style heater element 2 Wire Grip heaters OEM terminals plug and play installation
-
Standard 2 Wire Grip heaters OEM terminals plug and play installation
-
Extended style heater element 3 Wire Grip heaters with OEM terminals plug and play installation
Will not work on GEN 4
-
Standard 3 Wire Grip heaters with OEM terminals for plug and play installation
Will not work on Gen 4
-
Easy and effective way to convert your flat plate steering post into a T-post allowing for pivoting style risers
-
Extended Brake line With OEM Matched Ends Ready to be bolted on
-
Easy and effective way to convert your flat plate steering post into a T-post allowing for pivoting style risers
-
Replacement LH Side Spring style Scratcher
-
Replacement RH Side Spring Style Scratcher
-
STANDARD PLASTIC MOMETARY PUSH BUTTON
-
Bolt on intstallation allowing Rider to position Hook orientation
-
Add handlebar hooks to your favorite handlebars
- single bolt locking design for ease of install
**Sold individually to put hooks on both ends of your handlebars order qty 2**
-
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
-
Steel Reversible Double Coil Wire Scratchers with Storage mounts
-
TAPERED 10 DEGREE BEND HANDLEBAR / INCLUDES LARGE BLACK BAR PAD
-
TAPERED 13 DEGREE BEND HANDLEBAR / INCLUDES LARGE BLACK BAR PAD
-
TAPERED 16 DEGREE BEND HOOKED HANDLEBAR BLACK/ INCLUDES LARGE BLACK BAR PAD
-
UNIVERSAL BILLET ALUMINUM ELECTRONIC REVERSE PUSH BUTTON BLACK (EXCEPT ELECTRIC START )
-
10″ Universal Throttle Cable Extension
-
Extended style heater element
-
Standard Square heater element grip heaters
-
Universl Grip insulator, thin profile, synthetic based insulator install in seconds.
*Required for all machines using grip heaters*
-
Snowmobile specific Handguard mounts for Stonewall Handguards
-
Lightweight Wire type Scratcher. Universal installation
-
TRA Primary clutch holder for installation and removal of the TRA primary clutch.
-
Complete A-arm scratcher kit includes the following: 16″ Ice Scratchers , 2 Qty A-Arm Ice Scratcher mounts, (Includes 1 of 185-102, QTY 2 of 185-106)
-
Self-contained food heating system simply just add water and heating pack, no open flame and no pots or pans.
-
Lightweight Flint fire starter with striker. Fire starter with built in Compass and Emergency whistle.
-
First Aid Kit: Water tight Aluminum Storage container 3.5″ Diameter 4.75″ Length compact lightweight package includes many of the essentials for small to medium lacerations in the backcountry.
-
Compact manual chainsaw perfect for getting you out of the less than ideal situation and back on your way.
-
Portable tool kit allows for trail side repairs. this kit can be stored within the HNG Rear bumper, a jacket pocket or any storage compartment on your machine.
Its lightweight and compact size make it convenient for traveling in the backcountry
-
Allows for easy mounting of any Straightline Performance ice scratcher to the A-arm of your snowmobile. **requires the use of 16″ Ice Scratchers. This is just for the A-arm Mount only.
-
Quickest and easiest Solution for a leaky, and hard to remove oil cap
-
Universal installation Reversible ice scratcher, replaceable carbide tip good for years of constand use.
Carbide tip is a wear item and may break do to hitting objects on the trails. This is to protect not having any issues with hanging up on the rail.
12″ Designed to be mounted on the suspension rail
-
Protects the powdercoat on your rails and keeps ice scratchers in the stored position until they’re ready to be deployed
-
Allows the ice scratcher carbide tip to stored when not in use.
-
Replacement Ice Scratcher tips for your Straightline Performance cable Ice Scratchers
-
Left Hand Replacement Scratcher end
-
Replacement Ice Scratcher end (sold each does not include tip) Right Hand / Right Side of Snowmobile
Right Hand Replacement Scratcher end
-
Tungsten inserts for TRA Adjustable pin kits
-
Ski-Doo Secondary Spring Fits all RER Clutches HPV, LPV & QRS
-
TRA Heavy Pin Kit 16-27g Includes Tungsten Slugs
-
TRA Light Full Range Pin Kit 11.1-20.3g Includes Tungsten Slugs
-
TRA Light Pin Kit 11.1-16.0g
-
TRA Medium Full Range Pin Kit 13-23.1g Includes Tungsten Slugs
-
TRA Medium Pin Kit 13.8-19.6g
-
Ski-Doo TRA Primary spring – Click on Color to see Compression of Spring
Compression Start/ End 1.6″-2.9″/ 41mm-74mm
-
Compleytly adjustable TRA arms Fits all TRA 3, TRA 5 and TRA 7
-
SPD31 Ramps Fits all TRA 3, TRA 5 and TRA 7
-
Universal compressor works on most primary and secondary clutches (does not work on P-Drive Primary clutch or QRS Secondary)
-
Universal Alignment bar, best way to ensure your clutches are aligned. Comes with instructions including off-sets for most modern machines.
-
This Spring puller is a must for every snowmobiler’s tool box. No more struggling to stretch your exhaust springs.
-
2006-07 Ski-Doo REV 800 H.O. Summit (Roller Secondary) 6000ft Clutch Kit – Off trail Mountain riding specific clutch kit
Showing 1–100 of 105 results