Latest Products
-
2012 - Current Polaris PRO/AXYS/MATRYX Throttle Safety Switch Bypass Plug
$ 39.95 -
UNIVERSAL BILLET ALUMINUM SINGLE ROCKER SWITCH ON/OFF (7/8 MOUNTING) BLACK ANODIZED
$ 39.95
-
Hustler Aluminum 7/8″ CLAMP AREA – 7/8″ HOOKED HANDLEBAR - 13 DEGREE SWEEP – 1″ RISE – 30″ WIDE – 1″ RISE - Hydro Dipped Carbon Fiber
$ 149.95
-
POLARIS 650/850/900R/BOOST TETHER MOUNT FOR RMK STEERING STEM
$ 19.95
-
Ski-Doo QRS Secondary Spring - Torsional Black
$ 25.00
Snowmobile specific grip glue. Will not break down in snowmobile grip heater scenario
Allows for Quick and Easy Adapting for Oversize Handlebars
• One piece 5″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
• One piece 8″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
Bolt on intstallation allowing Rider to position Hook orientation
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
BACKCOUNTRY -TAPERED 1-1/8″ CLAMP AREA -7/8″ HANDLEBAR – 14 DEGREE SWEEP – 29″ WIDE – BLACK ANODIZED
TAPERED BACKCOUNTRY BEND HANDLEBAR BLACK / INCLUDES LARGE BLACK BAR PAD
Great and simple Way to add Protection on your Stock Polaris Handlebars or Personalize your RSI Aluminum rise Handlebars
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
BILLET ALUMINUM ENGINE KILL SWITCH PUSH BUTTON BLACK
- Self adhesive grip tape to fully wrap your handlebars and hooks with a seamless finish.
- High traction outer synthetic rubber stays grippy even when wet or cold.
- Gel absorbs vibration for a smoother feel at the handlebars.
Aluminum Rise Style Handlebars Bolt on Replacement for OEM Polaris Handlebars
BOONDOGGLER TAPERED 10 DEGREE HOOKED HANDLEBAR 2″ RISE
CHROMOLY 13 DEGREE HANDLEBAR
CHROMOLY 10 DEGREE HANDLEBAR
CHROMOLY 16 DEGREE HOOKED HANDLEBAR
CHROMOLY HUSTLER HANDLEBAR 1″ RISE HOOKED HANDLEBARS
- Universal mounting for all machines equipped with a T-post steering post
- Helps develop the next generation of riders
Mountain Grab Bar Mounts Allow for mounting on any 7/8 or 1& 1/8″ Handlebar
Accepts 7/8″ and oversize 1 & 1/8″ Handlebars. Universal Installation on any t-post steering post.
Semi Ridgid Grab Bar Installs on RSI Aluminum Rise Handlebars or Can be Combined with HA1002 Grab Bar Mounts and installed on any snowmonile Handlebar
Hayes Brake Specific Snowmobile Handguard mounts for Stonewall Handguards. * does not work on 2020 Hayes Stealth Brake
TAPERED RACE BEND HANDLEBAR BLACK / INCLUDES SMALL BLACK BAR PAD
Replacement LH Side Spring style Scratcher
Replacement RH Side Spring style Scratcher
Flexible LED Lighted Handgurads will not break in the event of a roll over.
Displays Phone inside a weather resistant Handlebar pad
Universal Heater kit- requires 12 volt power source.
• Dual pivoting adjustability allows you to position handlebars where you want them.
• The shortest pivoting Riser available on the market at 1″
• Easy one bolt installation is super easy and very strong.
• Accepts both Standard 7/8″ and 1 & 1/8″ Oversized Handlebars2020 Hayes Stealth Brake Specific Snowmobile Handguard mounts for Stonewall Handguards.
Extended style heater element 2 Wire Grip heaters OEM terminals plug and play installation
Standard 2 Wire Grip heaters OEM terminals plug and play installation
Extended style heater element 3 Wire Grip heaters with OEM terminals plug and play installation
Will not work on GEN 4
Standard 3 Wire Grip heaters with OEM terminals for plug and play installation
Will not work on Gen 4
Extended Brake line With OEM Matched Ends Ready to be bolted on
Easy and effective way to convert your flat plate steering post into a T-post allowing for pivoting style risers
Replacement LH Side Spring style Scratcher
STANDARD PLASTIC MOMETARY PUSH BUTTON
Bolt on intstallation allowing Rider to position Hook orientation
Add handlebar hooks to your favorite handlebars
- single bolt locking design for ease of install
**Sold individually to put hooks on both ends of your handlebars order qty 2**
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
Steel Reversible Double Coil Wire Scratchers with Storage mounts
TAPERED 10 DEGREE BEND HANDLEBAR / INCLUDES LARGE BLACK BAR PAD
TAPERED 13 DEGREE BEND HANDLEBAR / INCLUDES LARGE BLACK BAR PAD
TAPERED 16 DEGREE BEND HOOKED HANDLEBAR BLACK/ INCLUDES LARGE BLACK BAR PAD
UNIVERSAL BILLET ALUMINUM ELECTRONIC REVERSE PUSH BUTTON BLACK (EXCEPT ELECTRIC START )
10″ Universal Throttle Cable Extension
Extended style heater element
Standard Square heater element grip heaters
Universl Grip insulator, thin profile, synthetic based insulator install in seconds.
*Required for all machines using grip heaters*
Snowmobile specific Handguard mounts for Stonewall Handguards
Lightweight Wire type Scratcher. Universal installation
TRA Primary clutch holder for installation and removal of the TRA primary clutch.
Complete A-arm scratcher kit includes the following: 16″ Ice Scratchers , 2 Qty A-Arm Ice Scratcher mounts, (Includes 1 of 185-102, QTY 2 of 185-106)
Self-contained food heating system simply just add water and heating pack, no open flame and no pots or pans.
Lightweight Flint fire starter with striker. Fire starter with built in Compass and Emergency whistle.
First Aid Kit: Water tight Aluminum Storage container 3.5″ Diameter 4.75″ Length compact lightweight package includes many of the essentials for small to medium lacerations in the backcountry.
Compact manual chainsaw perfect for getting you out of the less than ideal situation and back on your way.
Portable tool kit allows for trail side repairs. this kit can be stored within the HNG Rear bumper, a jacket pocket or any storage compartment on your machine.
Its lightweight and compact size make it convenient for traveling in the backcountry
Allows for easy mounting of any Straightline Performance ice scratcher to the A-arm of your snowmobile. **requires the use of 16″ Ice Scratchers. This is just for the A-arm Mount only.
Quickest and easiest Solution for a leaky, and hard to remove oil cap
Universal installation Reversible ice scratcher, replaceable carbide tip good for years of constand use.
Carbide tip is a wear item and may break do to hitting objects on the trails. This is to protect not having any issues with hanging up on the rail.
12″ Designed to be mounted on the suspension rail
Protects the powdercoat on your rails and keeps ice scratchers in the stored position until they’re ready to be deployed
Allows the ice scratcher carbide tip to stored when not in use.
Replacement Ice Scratcher tips for your Straightline Performance cable Ice Scratchers
Left Hand Replacement Scratcher end
Replacement Ice Scratcher end (sold each does not include tip) Right Hand / Right Side of Snowmobile
Right Hand Replacement Scratcher end
Tungsten inserts for TRA Adjustable pin kits
Ski-Doo Secondary Spring Fits all RER Clutches HPV, LPV & QRS
TRA Heavy Pin Kit 16-27g Includes Tungsten Slugs
TRA Light Full Range Pin Kit 11.1-20.3g Includes Tungsten Slugs
TRA Light Pin Kit 11.1-16.0g
TRA Medium Full Range Pin Kit 13-23.1g Includes Tungsten Slugs
TRA Medium Pin Kit 13.8-19.6g
Universal compressor works on most primary and secondary clutches (does not work on P-Drive Primary clutch or QRS Secondary)
Universal Alignment bar, best way to ensure your clutches are aligned. Comes with instructions including off-sets for most modern machines.
This Spring puller is a must for every snowmobiler’s tool box. No more struggling to stretch your exhaust springs.
Complete adjustable weight kit or Fine Tuning kit
2003-07 Ski-doo 500ss / 600 H.O. Nitrous Kit
Lightweight Muffler
Straightline Performance’s lightweight mufflers are designed for today’s noise conscious environments. They produce a low, deeper tone with keeping peak and mid range volume similar to stock. No modifications needed for install. Most mufflers come with polished ceramic coating. Some applications produce a 1-2hp increase, but all are guaranteed not to lose power.
TRA Primary clutch puller for removal of the TRA primary clutch. (works on all TRA’s except 583 and 617 engines)
Showing 1–100 of 103 results
