Latest Products
-
2012 - Current Polaris PRO/AXYS/MATRYX Throttle Safety Switch Bypass Plug
$ 39.95 -
UNIVERSAL BILLET ALUMINUM SINGLE ROCKER SWITCH ON/OFF (7/8 MOUNTING) BLACK ANODIZED
$ 39.95
-
Hustler Aluminum 7/8″ CLAMP AREA – 7/8″ HOOKED HANDLEBAR - 13 DEGREE SWEEP – 1″ RISE – 30″ WIDE – 1″ RISE - Hydro Dipped Carbon Fiber
$ 149.95
-
POLARIS 650/850/900R/BOOST TETHER MOUNT FOR RMK STEERING STEM
$ 19.95
-
Ski-Doo QRS Secondary Spring - Torsional Black
$ 25.00
Snowmobile specific grip glue. Will not break down in snowmobile grip heater scenario
Allows for Quick and Easy Adapting for Oversize Handlebars
Easily add 1/2″ or 3/4″ rise to your Polaris RMK while maintaining your stock handlebars.
• One piece 5″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
• One piece 8″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
Extended Brake line With OEM Matched Ends Ready to be bolted on
Bolt on intstallation allowing Rider to position Hook orientation
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
BACKCOUNTRY -TAPERED 1-1/8″ CLAMP AREA -7/8″ HANDLEBAR – 14 DEGREE SWEEP – 29″ WIDE – BLACK ANODIZED
TAPERED BACKCOUNTRY BEND HANDLEBAR BLACK / INCLUDES LARGE BLACK BAR PAD
Great and simple Way to add Protection on your Stock Polaris Handlebars or Personalize your RSI Aluminum rise Handlebars
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
BILLET ALUMINUM ENGINE KILL SWITCH PUSH BUTTON BLACK
- Self adhesive grip tape to fully wrap your handlebars and hooks with a seamless finish.
- High traction outer synthetic rubber stays grippy even when wet or cold.
- Gel absorbs vibration for a smoother feel at the handlebars.
Aluminum Rise Style Handlebars Bolt on Replacement for OEM Polaris Handlebars
BOONDOGGLER TAPERED 10 DEGREE HOOKED HANDLEBAR 2″ RISE
CHROMOLY 13 DEGREE HANDLEBAR
CHROMOLY 16 DEGREE HOOKED HANDLEBAR
CHROMOLY HUSTLER HANDLEBAR 1″ RISE HOOKED HANDLEBARS
- Universal mounting for all machines equipped with a T-post steering post
- Helps develop the next generation of riders
Mountain Grab Bar Mounts Allow for mounting on any 7/8 or 1& 1/8″ Handlebar
Accepts 7/8″ and oversize 1 & 1/8″ Handlebars. Universal Installation on any t-post steering post.
Hayes Brake Specific Snowmobile Handguard mounts for Stonewall Handguards. * does not work on 2020 Hayes Stealth Brake
Square heater elements, OEM terminals plug and play installation
Complete Kit with Everything you need For your Polaris 600/800 RMK
Billet Throttle block With Billet Kill Switch uses OEM TSS Switch
Easy and effective way to convert your flat plate steering post into a T-post allowing for pivoting style risers
Billet Throttle block uses OEM TSS Switch and Kill switch
TAPERED RACE BEND HANDLEBAR BLACK / INCLUDES SMALL BLACK BAR PAD
Replacement LH Side Spring style Scratcher
Replacement RH Side Spring style Scratcher
Universal Heater kit- requires 12 volt power source.
2020 Hayes Stealth Brake Specific Snowmobile Handguard mounts for Stonewall Handguards.
Replacement LH Side Spring style Scratcher
Replacement RH Side Spring Style Scratcher
STANDARD PLASTIC MOMETARY PUSH BUTTON
Bolt on intstallation allowing Rider to position Hook orientation
Add handlebar hooks to your favorite handlebars
- single bolt locking design for ease of install
**Sold individually to put hooks on both ends of your handlebars order qty 2**
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
Steel Reversible Double Coil Wire Scratchers with Storage mounts
TAPERED 10 DEGREE BEND HANDLEBAR / INCLUDES LARGE BLACK BAR PAD
TAPERED 13 DEGREE BEND HANDLEBAR / INCLUDES LARGE BLACK BAR PAD
TAPERED 16 DEGREE BEND HOOKED HANDLEBAR BLACK/ INCLUDES LARGE BLACK BAR PAD
UNIVERSAL BILLET ALUMINUM ELECTRONIC REVERSE PUSH BUTTON BLACK (EXCEPT ELECTRIC START )
10″ Universal Throttle Cable Extension
Standard Square heater element grip heaters
Universl Grip insulator, thin profile, synthetic based insulator install in seconds.
*Required for all machines using grip heaters*
Snowmobile specific Handguard mounts for Stonewall Handguards
Lightweight Wire type Scratcher. Universal installation
Change Primary Clutch weights, Trail-side without removing the Clutch from the sled or pulling the primary clutch spring
Parts Included: Custom Wiseco Piston, Circlips pins, Piston Pin, Piston Rings
Parts Included: Custom Wiseco Pistons, Circlips pins, Spacer plate, longer cylinder bolts, Cylinder alignment pins, and one Base Gasket (you reuse the stock base gasket)
2008-12 Polaris RMK, Dragon RMK, IQ RMK Gripper Seat Cover
Complete A-arm scratcher kit includes the following: 16″ Ice Scratchers , 2 Qty A-Arm Ice Scratcher mounts, (Includes 1 of 185-102, QTY 2 of 185-106)
Lightweight Flint fire starter with striker. Fire starter with built in Compass and Emergency whistle.
First Aid Kit: Water tight Aluminum Storage container 3.5″ Diameter 4.75″ Length compact lightweight package includes many of the essentials for small to medium lacerations in the backcountry.
Compact manual chainsaw perfect for getting you out of the less than ideal situation and back on your way.
Portable tool kit allows for trail side repairs. this kit can be stored within the HNG Rear bumper, a jacket pocket or any storage compartment on your machine.
Its lightweight and compact size make it convenient for traveling in the backcountry
Allows for easy mounting of any Straightline Performance ice scratcher to the A-arm of your snowmobile. **requires the use of 16″ Ice Scratchers. This is just for the A-arm Mount only.
Quickest and easiest Solution for a leaky, and hard to remove oil cap
Universal installation Reversible ice scratcher, replaceable carbide tip good for years of constand use.
Carbide tip is a wear item and may break do to hitting objects on the trails. This is to protect not having any issues with hanging up on the rail.
12″ Designed to be mounted on the suspension rail
2000 and newer Polaris Clutch puller works for all P-85, P-80,
Protects the powdercoat on your rails and keeps ice scratchers in the stored position until they’re ready to be deployed
Allows the ice scratcher carbide tip to stored when not in use.
Replacement Ice Scratcher tips for your Straightline Performance cable Ice Scratchers
Left Hand Replacement Scratcher end
Replacement Ice Scratcher end (sold each does not include tip) Right Hand / Right Side of Snowmobile
Right Hand Replacement Scratcher end
Universal compressor works on most primary and secondary clutches (does not work on P-Drive Primary clutch or QRS Secondary)
Universal Alignment bar, best way to ensure your clutches are aligned. Comes with instructions including off-sets for most modern machines.
This Spring puller is a must for every snowmobiler’s tool box. No more struggling to stretch your exhaust springs.
2010-16 (PRO Chassis) 800 Polaris Rush/Switchback/RMK Clutch kit with Adjustable Weights
The lightest muffler in the industry. Installation is simple and there zero jetting or fuel programming requirements.
2010-16 Polaris 800 Rush/Switchback/RMK Nitrous Kit
Straightline’s single pipes produce a wider power band, with great bottom end power, and improved top end speed.
Straightline’s Y-pipes are an easy to install direct bolt-on performance part.
Straightline’s Y-pipes are an easy to install direct bolt-on performance part.
52 Gram Adjustable Weight Kit (bushed) Set of 3 / Now with the capabilty to use Magnets, Bolts, Washers, and Tungsten.
64-80 Gram Adjustable Weight Kit (bushed) Set of 3 / Now with the capabilty to use Magnets, Bolts, Washers, and Tungsten.
78 Gram Adjustable Weight Kit (bushed) Set of 3 / Now with the capabilty to use Magnets, Bolts, Washers, and Tungsten.
Complete adjustable weight kit or Fine Tuning kit
A Complete Performance Exhaust package for your machine. Simple bolt on installation, all components use stock mounting locations, and OEM hardware.
Showing 1–100 of 109 results
