Latest Products
-
UNIVERSAL BILLET ALUMINUM SINGLE ROCKER SWITCH ON/OFF (7/8 MOUNTING) BLACK ANODIZED
$ 39.95
-
Hustler Aluminum 7/8″ CLAMP AREA – 7/8″ HOOKED HANDLEBAR - 13 DEGREE SWEEP – 1″ RISE – 30″ WIDE – 1″ RISE - Hydro Dipped Carbon Fiber
$ 149.95
-
POLARIS 650/850/900R/BOOST TETHER MOUNT FOR RMK STEERING STEM
$ 19.95
-
Ski-Doo QRS Secondary Spring - Torsional Black
$ 25.00
-
ARCTIC CAT CATALYST CHASSIS BILLET ALUMINUM MOMENTARY KILL SWITCH BLACK ANODIZED W/ OEM CONNECTOR
$ 59.95
-
Snowmobile specific grip glue. Will not break down in snowmobile grip heater scenario
-
• One piece 5″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
-
• One piece 8″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
-
Bolt on intstallation allowing Rider to position Hook orientation
-
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
- Self adhesive grip tape to fully wrap your handlebars and hooks with a seamless finish.
- High traction outer synthetic rubber stays grippy even when wet or cold.
- Gel absorbs vibration for a smoother feel at the handlebars.
-
Aluminum Rise Style Handlebars Bolt on Replacement for OEM Polaris Handlebars
-
Mountain Grab Bar Mounts Allow for mounting on any 7/8 or 1& 1/8″ Handlebar
-
Accepts 7/8″ and oversize 1 & 1/8″ Handlebars. Universal Installation on any t-post steering post.
-
Displays Phone inside a weather resistant Handlebar pad
-
Extended style heater element 2 Wire Grip heaters OEM terminals plug and play installation
-
Standard 2 Wire Grip heaters OEM terminals plug and play installation
-
Extended style heater element 3 Wire Grip heaters with OEM terminals plug and play installation
Will not work on GEN 4
-
Standard 3 Wire Grip heaters with OEM terminals for plug and play installation
Will not work on Gen 4
-
Extended Brake line With OEM Matched Ends Ready to be bolted on
-
Billet Throttle block uses OEM Kill Switch
-
Billet Throttle block With Plug and Play Billet Kill Switch
-
Billet Throttle block With Universal Billet Kill Switch
-
BILLET ALUMINUM ENGINE KILL SWITCH PUSH BUTTON BLACK, 2008-18 SKI-DOO XP/XM/XS / OEM TERMINALS (2-STROKE ENGINES ONLY WITHOUT ELECTRIC START)
-
Replacement LH Side Spring style Scratcher
-
Replacement RH Side Spring Style Scratcher
-
STANDARD PLASTIC MOMETARY PUSH BUTTON
-
Bolt on intstallation allowing Rider to position Hook orientation
-
Add handlebar hooks to your favorite handlebars
- single bolt locking design for ease of install
**Sold individually to put hooks on both ends of your handlebars order qty 2**
-
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
-
Steel Reversible Double Coil Wire Scratchers with Storage mounts
-
10″ Universal Throttle Cable Extension
-
Standard Square heater element grip heaters
-
Universl Grip insulator, thin profile, synthetic based insulator install in seconds.
*Required for all machines using grip heaters*
-
Lightweight Wire type Scratcher. Universal installation
-
Fully CNC Billet Brake Lever powder coated black €œShorty style€ Two finger operation
Uses OEM mounting hardware.
-
Fully CNC Billet Brake Lever €œShorty style€ Two finger operation
Uses OEM mounting hardware.
-
2008-20 Ski-Doo QRS Jackshaft Alignment Shim Kit Includes 4 Clutch Side Bearing Shims, 3 Bearing retainer Shims, 1 Beveled Gear side Retainer Shim, 3 Gear side Bearing shims
-
Quick adjust, just as the name says not tools required for your trailside clicker changes
-
simple bolt on installation heavy duty construction with a unique Carbon Fiber Tube
-
simple bolt on installation heavy duty construction with a unique Carbon Fiber Tube
-
Straightline’s single pipes produce a wider power band, with great bottom end power, and improved top end speed.
-
2009-18 Ski-doo 600/800 E-TEC Fuel Programming System
-
A Complete Performance Exhaust package for your machine. simple bolt on installation, all components use stock mounting locations, and OEM hardware.
-
Straightline’s single pipes produce a wider power band, with great bottom end power, and improved top end speed.
-
Straightline’s Y-pipes are an easy to install direct bolt-on performance part.
-
Straightline’s Y-pipes are an easy to install direct bolt-on performance part.
-
The lightest muffler in the industry. Installation is simple and there zero jetting or fuel programming requirements.
-
Lightweight Muffler
Straightline Performance’s lightweight mufflers are designed for today’s noise conscious environments. They produce a low, deeper tone with keeping peak and mid range volume similar to stock. No modifications needed for install. Most mufflers come with polished ceramic coating. Some applications produce a 1-2hp increase, but all are guaranteed not to lose power.
-
TRA Primary clutch holder for installation and removal of the TRA primary clutch.
-
Complete A-arm scratcher kit includes the following: 16″ Ice Scratchers , 2 Qty A-Arm Ice Scratcher mounts, (Includes 1 of 185-102, QTY 2 of 185-106)
-
Lightweight Flint fire starter with striker. Fire starter with built in Compass and Emergency whistle.
-
First Aid Kit: Water tight Aluminum Storage container 3.5″ Diameter 4.75″ Length compact lightweight package includes many of the essentials for small to medium lacerations in the backcountry.
-
Compact manual chainsaw perfect for getting you out of the less than ideal situation and back on your way.
-
Portable tool kit allows for trail side repairs. this kit can be stored within the HNG Rear bumper, a jacket pocket or any storage compartment on your machine.
Its lightweight and compact size make it convenient for traveling in the backcountry
-
Allows for easy mounting of any Straightline Performance ice scratcher to the A-arm of your snowmobile. **requires the use of 16″ Ice Scratchers. This is just for the A-arm Mount only.
-
Quickest and easiest Solution for a leaky, and hard to remove oil cap
-
Universal installation Reversible ice scratcher, replaceable carbide tip good for years of constand use.
Carbide tip is a wear item and may break do to hitting objects on the trails. This is to protect not having any issues with hanging up on the rail.
12″ Designed to be mounted on the suspension rail
-
Protects the powdercoat on your rails and keeps ice scratchers in the stored position until they’re ready to be deployed
-
Allows the ice scratcher carbide tip to stored when not in use.
-
Replacement Ice Scratcher tips for your Straightline Performance cable Ice Scratchers
-
Left Hand Replacement Scratcher end
-
Replacement Ice Scratcher end (sold each does not include tip) Right Hand / Right Side of Snowmobile
Right Hand Replacement Scratcher end
-
Replacement bit for 151-106
-
2013-17 Ski-doo 800 XS E-TEC 120″ Track 0-3000ft Clutch Kit designed to improve Backshift, Acceleration and Top speed
-
Tungsten inserts for TRA Adjustable pin kits
-
Ski-Doo Secondary Spring Fits all RER Clutches HPV, LPV & QRS
-
TRA Light Pin Kit 11.1-16.0g
-
TRA Medium Pin Kit 13.8-19.6g
-
Compleytly adjustable TRA arms Fits all TRA 3, TRA 5 and TRA 7
-
Universal compressor works on most primary and secondary clutches (does not work on P-Drive Primary clutch or QRS Secondary)
-
Universal Alignment bar, best way to ensure your clutches are aligned. Comes with instructions including off-sets for most modern machines.
-
This Spring puller is a must for every snowmobiler’s tool box. No more struggling to stretch your exhaust springs.
-
Complete adjustable weight kit or Fine Tuning kit
-
QRS smooth Shift Bearing (works on all 2008 Ski-doo QRS secondary machines) 2012-18 Arcitic Cat Secondary, 2018-21 Arcitc Cat with boss secondary
-
Complete Service Tool kit with everything you need to service your Ski-Doo TRA & QRS secondary clutches. All the tools required to install your own clutch kit.
-
TRA Primary clutch puller for removal of the TRA primary clutch. (works on all TRA’s except 583 and 617 engines)
-
3 Piece Button holder to keep buttons in place for assembly/ disassembly.
-
2.5lb Nitrous Bottle (non-siphon tube)
