Latest Products
-
2012 - Current Polaris PRO/AXYS/MATRYX Throttle Safety Switch Bypass Plug
$ 39.95 -
UNIVERSAL BILLET ALUMINUM SINGLE ROCKER SWITCH ON/OFF (7/8 MOUNTING) BLACK ANODIZED
$ 39.95
-
Hustler Aluminum 7/8″ CLAMP AREA – 7/8″ HOOKED HANDLEBAR - 13 DEGREE SWEEP – 1″ RISE – 30″ WIDE – 1″ RISE - Hydro Dipped Carbon Fiber
$ 149.95
-
POLARIS 650/850/900R/BOOST TETHER MOUNT FOR RMK STEERING STEM
$ 19.95
-
Ski-Doo QRS Secondary Spring - Torsional Black
$ 25.00
Snowmobile specific grip glue. Will not break down in snowmobile grip heater scenario
Easily add 1/2″ or 3/4″ rise to your Polaris RMK while maintaining your stock handlebars.
Billet Throttle block With Billet Kill Switch uses OEM TSS Switch
• One piece 5″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
• One piece 8″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
Bolt on intstallation allowing Rider to position Hook orientation
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
- Self adhesive grip tape to fully wrap your handlebars and hooks with a seamless finish.
- High traction outer synthetic rubber stays grippy even when wet or cold.
- Gel absorbs vibration for a smoother feel at the handlebars.
Aluminum Rise Style Handlebars Bolt on Replacement for OEM Polaris Handlebars
Mountain Grab Bar Mounts Allow for mounting on any 7/8 or 1& 1/8″ Handlebar
Accepts 7/8″ and oversize 1 & 1/8″ Handlebars. Universal Installation on any t-post steering post.
Extended style heater element 3 Wire Grip heaters OEM terminals plug and play installation
Powdercoated Aluminum Mounting plate for Polaris AXYS
Plug and play USB Charger
Plug and play Heater kit for Polaris AXYS/ Matryx machines
Billet Throttle block With Billet Kill Switch uses OEM TSS Switch
Complete Tether cord kit with mount plate kit for 2019 850 Polaris AXYS RMK
Standard heater element Grip heaters with OEM terminals plug and play installation
Easy and effective way to convert your flat plate steering post into a T-post allowing for pivoting style risers
Billet Throttle block uses OEM TSS Switch and Kill switch
Replacement LH Side Spring style Scratcher
STANDARD PLASTIC MOMETARY PUSH BUTTON
Bolt on intstallation allowing Rider to position Hook orientation
Add handlebar hooks to your favorite handlebars
- single bolt locking design for ease of install
**Sold individually to put hooks on both ends of your handlebars order qty 2**
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
Steel Reversible Double Coil Wire Scratchers with Storage mounts
Plug and Play Polaris 650 & 850 Tether cord
10″ Universal Throttle Cable Extension
Standard Square heater element grip heaters
Plug and play USB Charger
Universl Grip insulator, thin profile, synthetic based insulator install in seconds.
*Required for all machines using grip heaters*
Lightweight Wire type Scratcher. Universal installation
Increased crash protection
- The next level in protection for your sport bumper
- Unique 6061 Aluminum extrusion provides superior strength.
2015-23 Polaris 800/850/900R AXYS/Matryx Nitrous Kit
The most tunable and precise kit on the market for your Polaris.
Comes complete with Straightline’s premier weight tuning kit that uses either magnets, or complete nut and washers for a more precise tuning. The kits come complete with a very precise baseline that rarely needs to be changed.
Excellent protection in all conditions.
Straightline’s Y-pipes are an easy to install direct bolt-on performance part.
Straightline’s Y-pipes are an easy to install direct bolt-on performance part.
The lightest muffler in the industry. Installation is simple and there zero jetting or fuel programming requirements. This is an extremely high end muffler with full stainless steel internals, and high end carbon fiber housing. The carbon muffler is designed for off trail and mountain use as it is on the louder side of the mufflers that Straightline Performance builds.
The muffler is completely rebuilding able muffler for lifetime usage. Rebuild kits can be purchased separately and come complete with or without a new carbon tube.
SAE J192, 1161 & SAE 2567 Certified Muffler!
Straightline Performance’s lightweight mufflers are designed for today’s noise conscious environments. The Lightweight muffler produces a low, deeper tone with keeping peak and mid-range volume similar to stock.
The most tunable and precise kit on the market for your Polaris.
Comes complete with Straightline’s premier weight tuning kit that uses either magnets, or complete nut and washers for a more precise tuning. The kits come complete with a very precise baseline that rarely needs to be changed.
The most tunable and precise kit on the market for your Polaris.
Comes complete with Straightline’s premier weight tuning kit that uses either magnets, or complete nut and washers for a more precise tuning. The kits come complete with a very precise baseline that rarely needs to be changed.
The most tunable and precise kit on the market for your Polaris.
Comes complete with Straightline’s premier weight tuning kit that uses either magnets, or complete nut and washers for a more precise tuning. The kits come complete with a very precise baseline that rarely needs to be changed.
Multi Color LED V-Bar, remote key fob changes color of LED Plug and play installation no cutting or splicing
The lightest muffler in the industry. Installation is simple and there is zero jetting or fuel programming requirements.
A Complete Performance Exhaust package for your machine. simple bolt on installation, all components use stock mounting locations, and OEM hardware.
SAE J192, 1161 & SAE 2567 Certified Muffler!
Straightline Performance’s lightweight mufflers are designed for today’s noise conscious environments. The Lightweight muffler produces a low, deeper tone with keeping peak and mid-range volume similar to stock.
Straightline’s single pipes produce a wider power band, with great bottom end power, and improved top end speed.
Ultra Light Muffler
The performance Straightline is known for in a quality polished stainless steel muffler. Rethinking standards in performance and quality, with a corrosion free for life material. Simple installation and no jetting requirements. Produces mid-level volume designed for off-trail mountain or race applications. The Ultra-light muffler is the best bang for the buck bolt on muffler on the market. No one compares to a full polished stainless steel with guaranteed performance, dyno tested results.
Change Primary Clutch weights, Trail-side without removing the Clutch from the sled or pulling the primary clutch spring
Multi Color LED V-Bar, remote key fob changes color of LED Complete wiring haness, Requires accesory 12v power wether it’s a battery or accesory power outlet from machine.
- The Hide “N” Go (HNG) rear bumper seamlessly integrates a hidden storage compartment for our optional tool/ Emergency kit.
- Build your emergency kit with options such as a Fire Starter, First Aid kit, Manual Chainsaw, or a Rachet and Socket set with popular bits for hood removal and emergency repairs.
- Combing our tapered and kicked up rear grab handle, modern styling and functionality for the ultimate package.
- The Hide “N” Go (HNG) rear bumper seamlessly integrates a hidden storage compartment for our optional tool/ Emergency kit.
- Build your emergency kit with options such as a Fire Starter, First Aid kit, Manual Chainsaw, or a Rachet and Socket set with popular bits for hood removal and emergency repairs.
- Combing our tapered and kicked up rear grab handle, modern styling and functionality for the ultimate package.
- The Hide “N” Go (HNG) rear bumper seamlessly integrates a hidden storage compartment for our optional tool/ Emergency kit.
- Build your emergency kit with options such as a Fire Starter, First Aid kit, Manual Chainsaw, or a Rachet and Socket set with popular bits for hood removal and emergency repairs.
- Combing our tapered and kicked up rear grab handle, modern styling and functionality for the ultimate package.
- The Hide “N” Go (HNG) rear bumper seamlessly integrates a hidden storage compartment for our optional tool/ Emergency kit.
- Build your emergency kit with options such as a Fire Starter, First Aid kit, Manual Chainsaw, or a Rachet and Socket set with popular bits for hood removal and emergency repairs.
- Combing our tapered and kicked up rear grab handle, modern styling and functionality for the ultimate package.
The most tunable and precise kit on the market for your Polaris.
Comes complete with Straightline’s premier weight tuning kit that uses either magnets, or complete nut and washers for a more precise tuning. The kits come complete with a very precise baseline that rarely needs to be changed.
2019-20 Polaris 144″ Track 850 Clutch kit 6000ft
The most tunable and precise kit on the market for your Polaris.
Comes complete with Straightline’s premier weight tuning kit that uses either magnets, or complete nut and washers for a more precise tuning. The kits come complete with a very precise baseline that rarely needs to be changed.
12v Wiring harness for Machines equipped with Battery
24″ long LED Inside a black annodized Billet housing. Requires 5 way splitter and Remix LED V-bar. Perfect for mounting under your Running boards or floor boards on your machine
5- way Splitter for use of Multiple Night Cruiser LEDs Required for use of more than 1 LED Water resistant
Complete A-arm scratcher kit includes the following: 16″ Ice Scratchers , 2 Qty A-Arm Ice Scratcher mounts, (Includes 1 of 185-102, QTY 2 of 185-106)
Lightweight Flint fire starter with striker. Fire starter with built in Compass and Emergency whistle.
First Aid Kit: Water tight Aluminum Storage container 3.5″ Diameter 4.75″ Length compact lightweight package includes many of the essentials for small to medium lacerations in the backcountry.
Compact manual chainsaw perfect for getting you out of the less than ideal situation and back on your way.
Portable tool kit allows for trail side repairs. this kit can be stored within the HNG Rear bumper, a jacket pocket or any storage compartment on your machine.
Its lightweight and compact size make it convenient for traveling in the backcountry
Allows for easy mounting of any Straightline Performance ice scratcher to the A-arm of your snowmobile. **requires the use of 16″ Ice Scratchers. This is just for the A-arm Mount only.
Quickest and easiest Solution for a leaky, and hard to remove oil cap
Universal installation Reversible ice scratcher, replaceable carbide tip good for years of constand use.
Carbide tip is a wear item and may break do to hitting objects on the trails. This is to protect not having any issues with hanging up on the rail.
12″ Designed to be mounted on the suspension rail
2000 and newer Polaris Clutch puller works for all P-85, P-80,
Protects the powdercoat on your rails and keeps ice scratchers in the stored position until they’re ready to be deployed
Allows the ice scratcher carbide tip to stored when not in use.
Replacement Ice Scratcher tips for your Straightline Performance cable Ice Scratchers
Left Hand Replacement Scratcher end
Replacement Ice Scratcher end (sold each does not include tip) Right Hand / Right Side of Snowmobile
Right Hand Replacement Scratcher end
Universal compressor works on most primary and secondary clutches (does not work on P-Drive Primary clutch or QRS Secondary)
Universal Alignment bar, best way to ensure your clutches are aligned. Comes with instructions including off-sets for most modern machines.
This Spring puller is a must for every snowmobiler’s tool box. No more struggling to stretch your exhaust springs.
4x Brighter tha Previous Bright White LED V-bar. Bright white Flood light fills voids in stock headlight
52 Gram Adjustable Weight Kit (bushed) Set of 3 / Now with the capabilty to use Magnets, Bolts, Washers, and Tungsten.
64-80 Gram Adjustable Weight Kit (bushed) Set of 3 / Now with the capabilty to use Magnets, Bolts, Washers, and Tungsten.
Showing 1–100 of 109 results
