Latest Products
-
UNIVERSAL BILLET ALUMINUM SINGLE ROCKER SWITCH ON/OFF (7/8 MOUNTING) BLACK ANODIZED
$ 39.95
-
Hustler Aluminum 7/8″ CLAMP AREA – 7/8″ HOOKED HANDLEBAR - 13 DEGREE SWEEP – 1″ RISE – 30″ WIDE – 1″ RISE - Hydro Dipped Carbon Fiber
$ 149.95
-
POLARIS 650/850/900R/BOOST TETHER MOUNT FOR RMK STEERING STEM
$ 19.95
-
Ski-Doo QRS Secondary Spring - Torsional Black
$ 25.00
-
ARCTIC CAT CATALYST CHASSIS BILLET ALUMINUM MOMENTARY KILL SWITCH BLACK ANODIZED W/ OEM CONNECTOR
$ 59.95
-
Snowmobile specific grip glue. Will not break down in snowmobile grip heater scenario
-
PLEATED TOP SEAT COVER SKI-DOO 2017- Current SUMMIT/FREERIDE GEN 4 CHASSIS
-
• One piece 5″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
-
• One piece 8″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
-
Bolt on intstallation allowing Rider to position Hook orientation
-
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
-
- Self adhesive grip tape to fully wrap your handlebars and hooks with a seamless finish.
- High traction outer synthetic rubber stays grippy even when wet or cold.
- Gel absorbs vibration for a smoother feel at the handlebars.
-
Aluminum Rise Style Handlebars Bolt on Replacement for OEM Polaris Handlebars
-
Mountain Grab Bar Mounts Allow for mounting on any 7/8 or 1& 1/8″ Handlebar
-
Accepts 7/8″ and oversize 1 & 1/8″ Handlebars. Universal Installation on any t-post steering post.
-
Extended Brake line With OEM Matched Ends Ready to be bolted on
-
Plug and play Heater kit for Ski-Doo Gen 4 machines
-
2017 Ski-Doo Gen 4/ Lynx Radien, Accessory Power adaptor for LED Handguards
-
Billet Throttle block With Plug and Play Billet Kill Switch
-
Extended style heater element 2 Wire Grip heaters OEM terminals plug and play installation
-
Standard style heater element 2 Wire Grip heaters OEM terminals plug and play installation
-
Billet Throttle block uses OEM Kill Switch
-
BILLET ALUMINUM ENGINE KILL SWITCH PUSH BUTTON BLACK, SKI-DOO 2017- Current GEN 4 / OEM TERMINALS (2-STROKE ENGINES ONLY)
-
Replacement LH Side Spring style Scratcher
-
STANDARD PLASTIC MOMETARY PUSH BUTTON
-
Bolt on intstallation allowing Rider to position Hook orientation
-
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
-
Steel Reversible Double Coil Wire Scratchers with Storage mounts
-
10″ Universal Throttle Cable Extension
-
Standard Square heater element grip heaters
-
Universl Grip insulator, thin profile, synthetic based insulator install in seconds.
*Required for all machines using grip heaters*
-
Lightweight Wire type Scratcher. Universal installation
-
2017-23 Ski-doo/Lynx Rev Gen 4&5 850 E-TEC Summit/ Freeride 146-175″ Track 6000ft Clutch Kit includes: Adjustable P-drive weights, Primary Sping, Secondary Spring, Helix and Recommended Settings
-
2017-23 Ski-Doo/Lynx 850 E-tec Fuel Programmer (Add Fuel Only)
-
Straightline’s Y-pipes are an easy to install direct bolt-on performance part. Check out all the information below.
- Select coating from dropdown below
- Ceramic coating helps reduce under hood temperatures
-
- The Hide “N” Go (HNG) rear bumper seamlessly integrates a hidden storage compartment for our optional tool/ Emergency kit.
- Build your emergency kit with options such as a Fire Starter, First Aid kit, Manual Chainsaw, or a Rachet and Socket set with popular bits for hood removal and emergency repairs.
- Combing our tapered and kicked up rear grab handle, modern styling and functionality for the ultimate package.
-
- The Hide “N” Go (HNG) rear bumper seamlessly integrates a hidden storage compartment for our optional tool/ Emergency kit.
- Build your emergency kit with options such as a Fire Starter, First Aid kit, Manual Chainsaw, or a Rachet and Socket set with popular bits for hood removal and emergency repairs.
- Combing our tapered and kicked up rear grab handle, modern styling and functionality for the ultimate package.
-
- The Hide “N” Go (HNG) rear bumper seamlessly integrates a hidden storage compartment for our optional tool/ Emergency kit.
- Build your emergency kit with options such as a Fire Starter, First Aid kit, Manual Chainsaw, or a Rachet and Socket set with popular bits for hood removal and emergency repairs.
- Combing our tapered and kicked up rear grab handle, modern styling and functionality for the ultimate package.
-
- The Hide “N” Go (HNG) rear bumper seamlessly integrates a hidden storage compartment for our optional tool/ Emergency kit.
- Build your emergency kit with options such as a Fire Starter, First Aid kit, Manual Chainsaw, or a Rachet and Socket set with popular bits for hood removal and emergency repairs.
- Combing our tapered and kicked up rear grab handle, modern styling and functionality for the ultimate package.
-
- The Hide “N” Go (HNG) rear bumper seamlessly integrates a hidden storage compartment for our optional tool/ Emergency kit.
- Build your emergency kit with options such as a Fire Starter, First Aid kit, Manual Chainsaw, or a Rachet and Socket set with popular bits for hood removal and emergency repairs.
- Combing our tapered and kicked up rear grab handle, modern styling and functionality for the ultimate package.
-
Bolt on aluminum skid plate, smooth profile minimizes drag.
-
- The Hide “N” Go (HNG) rear bumper seamlessly integrates a hidden storage compartment for our optional tool/ Emergency kit.
- Build your emergency kit with options such as a Fire Starter, First Aid kit, Manual Chainsaw, or a Rachet and Socket set with popular bits for hood removal and emergency repairs.
- Combing our tapered and kicked up rear grab handle, modern styling and functionality for the ultimate package.
-
2017-23 Ski-doo Rev Gen 4&5 and Lynx 850 Complete Nitrous Kit
-
Bottom Wing. Must purchase 183-227 in order to attach this part of the bumper.
-
The Sport Upper wing is the start to any of our 4 different bumper options. With a streamline design and the fitted wing design this bumper enhances and protects the front end of your Ski-Doo G4 & 5 or Lynx Radien. Build you level of protection and match your wrap or color scheme.
- The ultimate in protection for those of you who want a bold look for your ride.
- The completely designed 6061 aluminum extrusion provides superior strength with an innovative and unique look to match the styling and great lines of today’s machines.
- Available in 7 different colors and parts can be mis-matched for a custom combination
- One piece aluminum skid plate offers additional flotation and reduces drag in deep snow
- Designed with crumple zones to protect the upper structure of today’s sleds
- Completely rebuild able with replacement parts after a crash or impact
-
2017-23 Ski-doo Rev Gen 4 & 5 / Lynx Raiden 850 E-TEC 146-175″ Track 0-3000ft Clutch Kit “Backcountry Boondocking” Kit includes: Adjustable P-drive weights, Primary Sping, Secondary Spring, Helix and Recommended Settings
-
2017 Ski-doo NOTCHED P-Drive Fully Adjustable Weight Kit – set of 3 Weights and All Tuning Componets (48-56G with tungsten kit Part # 121-246)
-
The lightest muffler in the industry. Installation is simple and there zero jetting or fuel programming requirements.
-
SAE J192, 1161 & SAE 2567 Certified Muffler!
Straightline Performance’s lightweight mufflers are designed for today’s noise conscious environments. The Lightweight muffler produces a low, deeper tone with keeping peak and mid-range volume similar to stock.
-
Ultra Light Muffler
The performance Straightline is known for in a quality polished stainless steel muffler. Rethinking standards in performance and quality, with a corrosion free for life material. Simple installation and no jetting requirements. Produces mid-level volume designed for off-trail mountain or race applications. The Ultra-light muffler is the best bang for the buck bolt on muffler on the market. No one compares to a full polished stainless steel with guaranteed performance, dyno tested results.
-
Multi Color LED V-Bar, remote key fob changes color of LED Plug and play installation no cutting or splicing
-
P-drive Clicker kit, OEM Quality Clicker kit works on all P-rdive clutches, allows you to add clickers on your 900 Ace Turbo 900 Ace, or 600 EFI , comes as a set to complete a set of 3 weights
-
Ski-doo P-Drive Fully Adjustable Weight Kit – set of 3 Weights and All Tuning Componets weight allows you to use your stock clicker or add a clicker back into the P-drive for added trailside adjustability. Bare Weight without clicker assembly is 48g (48-81g with tungsten kit Part # 121-246)
-
A Complete Performance Exhaust package at a fraction of the price, use your stock single pipe and gain the same level of performance as ocompetitors complete exhaust packages. simple bolt on installation, all components use stock mounting locations, and OEM hardware.
-
Multi Color LED V-Bar, remote key fob changes color of LED Complete wiring haness, Requires accesory 12v power wether it’s a battery or accesory power outlet from machine.
-
Additional defense from Excess Belt Heat and wear.
-
GRIPPER SEAT COVER KIDOO 2017- Current GEN 4 SUMMIT/FREERIDE SEAT COVER (does not work on expert)
-
Billet Throttle block With Plug and Play Billet Kill Switch
-
2008-20 Ski-Doo QRS Jackshaft Alignment Shim Kit Includes 4 Clutch Side Bearing Shims, 3 Bearing retainer Shims, 1 Beveled Gear side Retainer Shim, 3 Gear side Bearing shims
-
12v Wiring harness for Machines equipped with Battery
-
24″ long LED Inside a black annodized Billet housing. Requires 5 way splitter and Remix LED V-bar. Perfect for mounting under your Running boards or floor boards on your machine
-
5- way Splitter for use of Multiple Night Cruiser LEDs Required for use of more than 1 LED Water resistant
-
Complete A-arm scratcher kit includes the following: 16″ Ice Scratchers , 2 Qty A-Arm Ice Scratcher mounts, (Includes 1 of 185-102, QTY 2 of 185-106)
-
Complete Service Tool kit with everything you need to service your Ski-Doo P-drive & QRS secondary clutches. All the tools required to install your own clutch kit.
Back in Stock December 15th 2022 – Pre Ordering available
-
Lightweight Flint fire starter with striker. Fire starter with built in Compass and Emergency whistle.
-
First Aid Kit: Water tight Aluminum Storage container 3.5″ Diameter 4.75″ Length compact lightweight package includes many of the essentials for small to medium lacerations in the backcountry.
-
Compact manual chainsaw perfect for getting you out of the less than ideal situation and back on your way.
-
Portable tool kit allows for trail side repairs. this kit can be stored within the HNG Rear bumper, a jacket pocket or any storage compartment on your machine.
Its lightweight and compact size make it convenient for traveling in the backcountry
-
Allows for easy mounting of any Straightline Performance ice scratcher to the A-arm of your snowmobile. **requires the use of 16″ Ice Scratchers. This is just for the A-arm Mount only.
-
Quickest and easiest Solution for a leaky, and hard to remove oil cap
-
Universal installation Reversible ice scratcher, replaceable carbide tip good for years of constand use.
Carbide tip is a wear item and may break do to hitting objects on the trails. This is to protect not having any issues with hanging up on the rail.
12″ Designed to be mounted on the suspension rail
-
Protects the powdercoat on your rails and keeps ice scratchers in the stored position until they’re ready to be deployed
-
Allows the ice scratcher carbide tip to stored when not in use.
-
Replacement Ice Scratcher tips for your Straightline Performance cable Ice Scratchers
-
Left Hand Replacement Scratcher end
-
Replacement Ice Scratcher end (sold each does not include tip) Right Hand / Right Side of Snowmobile
Right Hand Replacement Scratcher end
-
Replacement bit for 151-106
-
Ski-doo / Can-Am P-Drive Clutch Holder (All Turbo 850/900)
Available at a future date.P-Drive Primary clutch holder for installation and removal of the P-Drive primary clutch.
-
Allows for removal/ installation of primary spring – Requires P-drive Compressor 151-111
-
P-Drive Primary clutch holder for installation and removal of the P-Drive primary clutch.
-
Works on all Ski-Doo P-Drive clutches 2017 and newer (will not work on 600RS 16/17- See Part # 151-116)
-
Skidoo P-Drive Pivot Bolt Kit (includes 3, 13g pivot bolts, 3, 15.4g Pivot Bolts, and 1g washers)
-
Allows for access to weights and when uesd with Circlip removal tool allows for removal/ installation of primary spring
-
Universal compressor works on most primary and secondary clutches (does not work on P-Drive Primary clutch or QRS Secondary)
-
Universal Alignment bar, best way to ensure your clutches are aligned. Comes with instructions including off-sets for most modern machines.
-
This Spring puller is a must for every snowmobiler’s tool box. No more struggling to stretch your exhaust springs.
-
4x Brighter tha Previous Bright White LED V-bar. Bright white Flood light fills voids in stock headlight
-
Complete adjustable weight kit or Fine Tuning kit
-
QRS smooth Shift Bearing (works on all 2008 Ski-doo QRS secondary machines) 2012-18 Arcitic Cat Secondary, 2018-21 Arcitc Cat with boss secondary
-
2.5lb Nitrous Bottle (non-siphon tube)
Showing 1–100 of 101 results