Latest Products
-
2012 - Current Polaris PRO/AXYS/MATRYX Throttle Safety Switch Bypass Plug
$ 39.95 -
UNIVERSAL BILLET ALUMINUM SINGLE ROCKER SWITCH ON/OFF (7/8 MOUNTING) BLACK ANODIZED
$ 39.95
-
Hustler Aluminum 7/8″ CLAMP AREA – 7/8″ HOOKED HANDLEBAR - 13 DEGREE SWEEP – 1″ RISE – 30″ WIDE – 1″ RISE - Hydro Dipped Carbon Fiber
$ 149.95
-
POLARIS 650/850/900R/BOOST TETHER MOUNT FOR RMK STEERING STEM
$ 19.95
-
Ski-Doo QRS Secondary Spring - Torsional Black
$ 25.00
Snowmobile specific grip glue. Will not break down in snowmobile grip heater scenario
• One piece 5″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
• One piece 8″ rubber grip.
• Ultra tacky diamond grip surface is soft and comfortable.
• Compatible with hand warmers.
• Sold per pair.
Bolt on intstallation allowing Rider to position Hook orientation
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
Universal Installation on any machine With Pivoting or Angled Risers (not recommended for Aluminum Rise Style Handlebars that have a crossbar) Machines Equipped With Pivot adaptors should use Large Bar pad
- Self adhesive grip tape to fully wrap your handlebars and hooks with a seamless finish.
- High traction outer synthetic rubber stays grippy even when wet or cold.
- Gel absorbs vibration for a smoother feel at the handlebars.
Aluminum Rise Style Handlebars Bolt on Replacement for OEM Polaris Handlebars
Mountain Grab Bar Mounts Allow for mounting on any 7/8 or 1& 1/8″ Handlebar
Accepts 7/8″ and oversize 1 & 1/8″ Handlebars. Universal Installation on any t-post steering post.
Billet Throttle block With Plug and Play Billet Kill Switch
Extended style heater element 2 Wire Grip heaters OEM terminals plug and play installation
Standard style heater element 2 Wire Grip heaters OEM terminals plug and play installation
Billet Throttle block uses OEM Kill Switch
BILLET ALUMINUM ENGINE KILL SWITCH PUSH BUTTON BLACK, SKI-DOO 2017- Current GEN 4 / OEM TERMINALS (2-STROKE ENGINES ONLY)
Replacement LH Side Spring style Scratcher
STANDARD PLASTIC MOMETARY PUSH BUTTON
Bolt on intstallation allowing Rider to position Hook orientation
Add handlebar hooks to your favorite handlebars
- single bolt locking design for ease of install
**Sold individually to put hooks on both ends of your handlebars order qty 2**
Kit includes Grips and hooks to transform any RSI aluminum Handlebar
Steel Reversible Double Coil Wire Scratchers with Storage mounts
10″ Universal Throttle Cable Extension
Standard Square heater element grip heaters
Universl Grip insulator, thin profile, synthetic based insulator install in seconds.
*Required for all machines using grip heaters*
Lightweight Wire type Scratcher. Universal installation
Fully CNC Billet Brake Lever powder coated black €œShorty style€ Two finger operation
Uses OEM mounting hardware.
Fully CNC Billet Brake Lever €œShorty style€ Two finger operation
Uses OEM mounting hardware.
Ski-doo 600R owners looking for an edge will be thrilled, we have had plenty of time for testing on the new 600R both on snow and our in-house dyno.
Single pipe 6HP increase over stock
- Muffler 7.5lbs weight savings
- Y-pipe 2hp increase over stock
2018-23 Ski-doo Rev Gen 4&5 / Lynx 600R E-TEC 129-137″ Track Performance Trail Kit 0-3000ft includes adjustable P-drive weights, Primary Spring , Helix, Secondary spring and Helix
Straightline’s Y-pipes are an easy to install direct bolt-on performance part.
2017 Ski-doo NOTCHED P-Drive Fully Adjustable Weight Kit – set of 3 Weights and All Tuning Componets (48-56G with tungsten kit Part # 121-246)
Ski-doo 600R owners looking for an edge will be thrilled, we have had plenty of time for testing on the new 600R both on snow and our in-house dyno. We are happy to announce all 3 exhaust parts are in production stages for fall delivery!
- Single pipe 6HP increase over stock
- Muffler 7.5lbs weight savings
- Y-pipe 2hp increase over stock
The lightest muffler in the industry. Installation is simple and there zero jetting or fuel programming requirements.
Straightline Performance’s lightweight mufflers are designed for today’s noise conscious environments. The Lightweight muffler produces a low, deeper tone with keeping peak and mid-range volume similar to stock.
P-drive Clicker kit, OEM Quality Clicker kit works on all P-rdive clutches, allows you to add clickers on your 900 Ace Turbo 900 Ace, or 600 EFI , comes as a set to complete a set of 3 weights
Ski-doo P-Drive Fully Adjustable Weight Kit – set of 3 Weights and All Tuning Componets weight allows you to use your stock clicker or add a clicker back into the P-drive for added trailside adjustability. Bare Weight without clicker assembly is 48g (48-81g with tungsten kit Part # 121-246)
Multi Color LED V-Bar, remote key fob changes color of LED Complete wiring haness, Requires accesory 12v power wether it’s a battery or accesory power outlet from machine.
GRIPPER SEAT COVER SKIDOO 2017- Current GEN 4 MXZ/Renegade/Backcountry
Additional defense from Excess Belt Heat and wear.
Billet Throttle block With Plug and Play Billet Kill Switch
2008-2026 Ski-Doo QRS Jackshaft Alignment Shim Kit Includes 4 Clutch Side Bearing Shims, 3 Bearing retainer Shims, 1 Beveled Gear side Retainer Shim, 3 Gear side Bearing shims
Ultra Light Muffler
The performance Straightline is known for in a quality polished stainless steel muffler. Rethinking standards in performance and quality, with a corrosion free for life material. Simple installation and no jetting requirements. Produces mid-level volume designed for off-trail mountain or race applications. The Ultra-light muffler is the best bang for the buck bolt on muffler on the market. No one compares to a full polished stainless steel with guaranteed performance, dyno tested results.
12v Wiring harness for Machines equipped with Battery
24″ long LED Inside a black annodized Billet housing. Requires 5 way splitter and Remix LED V-bar. Perfect for mounting under your Running boards or floor boards on your machine
5- way Splitter for use of Multiple Night Cruiser LEDs Required for use of more than 1 LED Water resistant
Complete A-arm scratcher kit includes the following: 16″ Ice Scratchers , 2 Qty A-Arm Ice Scratcher mounts, (Includes 1 of 185-102, QTY 2 of 185-106)
Complete Service Tool kit with everything you need to service your Ski-Doo P-drive & QRS secondary clutches. All the tools required to install your own clutch kit.
Back in Stock December 15th 2022 – Pre Ordering available
Lightweight Flint fire starter with striker. Fire starter with built in Compass and Emergency whistle.
First Aid Kit: Water tight Aluminum Storage container 3.5″ Diameter 4.75″ Length compact lightweight package includes many of the essentials for small to medium lacerations in the backcountry.
Compact manual chainsaw perfect for getting you out of the less than ideal situation and back on your way.
Portable tool kit allows for trail side repairs. this kit can be stored within the HNG Rear bumper, a jacket pocket or any storage compartment on your machine.
Its lightweight and compact size make it convenient for traveling in the backcountry
Allows for easy mounting of any Straightline Performance ice scratcher to the A-arm of your snowmobile. **requires the use of 16″ Ice Scratchers. This is just for the A-arm Mount only.
Quickest and easiest Solution for a leaky, and hard to remove oil cap
Universal installation Reversible ice scratcher, replaceable carbide tip good for years of constand use.
Carbide tip is a wear item and may break do to hitting objects on the trails. This is to protect not having any issues with hanging up on the rail.
12″ Designed to be mounted on the suspension rail
Protects the powdercoat on your rails and keeps ice scratchers in the stored position until they’re ready to be deployed
Allows the ice scratcher carbide tip to stored when not in use.
Replacement Ice Scratcher tips for your Straightline Performance cable Ice Scratchers
Left Hand Replacement Scratcher end
Replacement Ice Scratcher end (sold each does not include tip) Right Hand / Right Side of Snowmobile
Right Hand Replacement Scratcher end
Replacement bit for 151-106
Ski-doo / Can-Am P-Drive Clutch Holder (All Turbo 850/900)
Available at a future date.P-Drive Primary clutch holder for installation and removal of the P-Drive primary clutch.
Ski-Doo Secondary Spring Fits all RER Clutches HPV, LPV & QRS
Allows for removal/ installation of primary spring – Requires P-drive Compressor 151-111
P-Drive Primary clutch holder for installation and removal of the P-Drive primary clutch.
Works on all Ski-Doo P-Drive clutches 2017 and newer (will not work on 600RS 16/17- See Part # 151-116)
Skidoo P-Drive Pivot Bolt Kit (includes 3, 13g pivot bolts, 3, 15.4g Pivot Bolts, and 1g washers)
Allows for access to weights and when uesd with Circlip removal tool allows for removal/ installation of primary spring
Universal compressor works on most primary and secondary clutches (does not work on P-Drive Primary clutch or QRS Secondary)
Universal Alignment bar, best way to ensure your clutches are aligned. Comes with instructions including off-sets for most modern machines.
This Spring puller is a must for every snowmobiler’s tool box. No more struggling to stretch your exhaust springs.
4x Brighter tha Previous Bright White LED V-bar. Bright white Flood light fills voids in stock headlight
Complete adjustable weight kit or Fine Tuning kit
QRS smooth Shift Bearing (works on all 2008-2026 Ski-doo QRS secondary machines) 2012-18 Arctic Cat Secondary, 2018-21 Arctic Cat with boss secondary.
2.5lb Nitrous Bottle (non-siphon tube)
